Popandcranky
Active Member
Hello all,
I am sorry for the delay and I can't seem to find the original post but I have put my stock Himalayan back together and it is running with the maps Sasa provided.
There were 4 maps made for an all stock 2019 BS4.
I made another short video about it here:
All in all the first one shows promise at its current altitude except for starts which seem to be a little difficult for all 4 maps. I am wanting to take it for a longer ride but am not sure if that is wise before getting back to you with this info. I am not sure what to look for but I remember some cautions about just running wild with it before some adjustments could be made.
One other new development is popping on heavy decel with all four maps.
BTW I completely understand the lack of advantage to using this ECU on a bike that is totally stock but i was faced with the need for a replacement after a major electrical failure and went this route for future upgrades.
Anyway watch and tell me what you think.
Regards,
Joe
I am sorry for the delay and I can't seem to find the original post but I have put my stock Himalayan back together and it is running with the maps Sasa provided.
There were 4 maps made for an all stock 2019 BS4.
I made another short video about it here:
One other new development is popping on heavy decel with all four maps.
BTW I completely understand the lack of advantage to using this ECU on a bike that is totally stock but i was faced with the need for a replacement after a major electrical failure and went this route for future upgrades.
Anyway watch and tell me what you think.
Regards,
Joe