Everything 6-speed

barima

Moderator
Staff member
Developer
It might be early days and possible clickbait, but while having the left side engine cover removed during the 500 conversion, i thought i might as well investigate the gear indicator sensor for a 6th gear. Nothing fancy as you would expect from RE, just a pin that rotates with the shift drum that provides ground for the contacts on the sensor.
The good news is that it has a contact for a 6th gear position, the bad news is that it doesn't work on the display... Providing ground to the 6th contact results in a 5 on the dashboard. I have a BS3 and while the sensor(wiring) on the BS4 is different i am not expecting a different outcome. The sensor could be used probably for an aftermarket gear indicator
 
Yeah, that was one of the issues we discussed last year, Thanx for coming back with the info.
 
Do you have a 6th Gear?
If I had 6 gears I would be quite happy to guess that the one after 5 was 6 :ROFLMAO: and count one more before Neutral going down:cool:
In my earlier Daze, just having a Neutral Light was Luxury. I could live without the Gear indicator.
 
In my head i already have a 6th gear :D . When i'm cruising on the highway, with the wind in my back i often try to engage another gear only to find out i'm in 5th already... And it will certainly get worse when the 500 is ready....
This is gonna be the next project after project kickstart
 
Well, lets get this ball rolling... i disassembled the spare engine since all kickstarter parts are in my own bike now.
As expected, the gearbox is pre-designed for 6th gear application.
The shiftdrum is not ready/equipped for 6th gear, but that seems logical otherwise you will get a feel in the shifterpedal that there is another gear available after 5th.

I did some research for current applications and the only two options that have a slight chance of success are the gearbox from a GT650 and maybe the 450 himalayan.
The GT650 gearbox looks quite similar and shares the same front sprocket as the himalayan. 6th gear is an overdrive as well. Even the shift drum seems similar.
For the 450 i really cant tell until there is at least a parts manual available.

There are some (indian) vids on YT where they replace the gearbox beacuse of damage.
So the question is, is anyone having a (damaged) gearbox from a GT650 laying around?
 

Attachments

  • IMG_20240427_104039_276.jpg
    IMG_20240427_104039_276.jpg
    2.2 MB · Views: 4
what is a GT650? you mean the Interceptor engine?

here is the Hitch parts book, can you show me the parts you would need? maybe I can source them here.

 
Last edited:
Parts have been "billed" which means they will eventually be shipped - however we will start the spiti tour around the time they might arrive. If they are late you will have to wait another month until I can ship them.
 
Sure, no problem. I still have a lot to investigate in the meantime. If all these parts are plug and play we can all have our six-speed ready before Christmas :-)
 
Thanks again Sam for sending the parts! Unfortunately the parts are not plug and play but certainly not useless.

To start with the shiftdrum: it has quite the same layout and dimensions. The shiftpawl grooves are identical only mirrored. That means shifting is the other way round. That makes sense if you look at the shifter pedal on an interceptor.
A big bummer is that the himalayan shiftdrum is cast iron and doesn't have material left on places where the groove for the sixth gear should be.
A keen eye can see this in the picture, its alligned in the center groove.
Otherwise the groove could be extendend on a machine (by. (mirror)copying the pattern of the 650 drum) and that part was set to go!
Maybe welding could be an option for a prototype.

The gears give a good insight on how the 6th gears are intended. They are quite different though on fundamntal issues like tooth design, so certainly not suitable for refabrication.

For the gear with the pawl groove there is only a spacing issue as far as i can see now.
The other gear i have to think about, this maybe also needs a redesign of the second gear (top left gear).
 

Attachments

  • IMG_20240706_130156_119.jpg
    IMG_20240706_130156_119.jpg
    1.4 MB · Views: 5
  • IMG_20240706_133033_295.jpg
    IMG_20240706_133033_295.jpg
    1.4 MB · Views: 5
I contacted Nova Racing in the UK and it sounds like they can certainly do the job.
They need to have the crankcase and complete gearbox to verify what is possible.
It is possible to do a one-off but we are talking big numbers then.
For a batch of 10 prices go down to "normal" level.
Estimation would be aroud 400 GBP for the shiftdrum and 150 GBP per gear when ordering a batch of 10.
That brings a 6-speed kit around the 700-850 GBP (at this moment unsure if two or three gears are needed).
I would need 2 kits, so if someone needs 8 kits than we can start this project... :)
 
I currently only know of ONX (the unspeakable) who may have the connections needed to pull this off in India. However IF it can be done here even with the usual profit margin for ONX it should be half the GB price.
I honestly do not see anyone putting 850 on the table for a 6th gear - the utility just isnt that great. A working solid kick start maybe but not a 6th gear. 400 however looks different. If you do not mind Dool or I could make the connection.
 
Yeah, 6 speed is only for the die-hards since the complete engine has to be dismantled to fit. This makes it apart from the necessary parts an expensive upgrade if this has to be done by a (paid) mechanic. It can be done in 1-2 days i guess though since it is an easy bike to work on.
Please feel free to contact ONX. They might be interested to make a kickstart kit as well ;-)
 
Got more money than you or me?
No need to answer that 😉
 
OK, here is ONX reply. He says the gears are not a problem if we take minimum 25 per item they will be relatively cheap (like 15 US$)
However the entire plan dies with the shifter:

If that hole wasn't there i could have modified the same shifter , i already studied the gear hox and just left it because to make it lots of investment need to develop the mold which way high and the quantity above 1000 pcs price will be 40$ other options do it in solid block billet material each will cost 250$ minimum 10 pcs

pic of "the hole"
 

Attachments

  • WhatsApp Image 2024-08-07 at 19.34.09_c15c0cd9.jpg
    WhatsApp Image 2024-08-07 at 19.34.09_c15c0cd9.jpg
    56.5 KB · Views: 3
Back
Top