J-Engine 500cc Thread
- Thread starter sam2019
- Start date
Attachments
Last edited by a moderator:
This is the relay supplied with the harness. Thanks
You only need the PT, the fuelx is only close loop, cruise mode , it's an extra
This is what Race dynamics replied:
[16/09, 09:16] Racedynamics Help varun: Hi
This is a Spare relay given inside the kit.
[16/09, 09:16] Racedynamics Help varun: This is just for spare.
When I purchased my Powertronics ECU, it came with 2 relays, when I installed one I managed to dislodge one of the connections which caused the fault of it running only in Neutral.
I contacted PT and they were super helpful.
Mine was a Himalayan.
I contacted PT and they were super helpful.
Mine was a Himalayan.
Fuelx is not suitable for such an increase in displacement .
I edited out the head supply offer because:
I was wrong there. I just got the first replacement head delivered today (after trying to get one for over 2 month!!) and it was NOT cheap. I had miscalculated (or rather wrongly guessed) based on the head prices for Hima and Bullet which are both cheaper.
This one goes for 16,000 INR (roughly 190 Euros). plus the work and transport to and from the workshop another 4000 INR. plus shipping (its heavy). So although we make zero profit from this it will still come to about 280-300 euros. Not cheap.
Another problem is that it seemingly is a rare commodity. And it is available in silver (metal) and black. I got the silver one although I wanted the black one. But what to do. I can always get out the spray can.
Last edited:
Yes according to RD the simple fuelx is ONLY for stock engines. The fuelx pro+ would be for 500cc BB sets BUT it is not needed. Only the PT V4 is needed.
500BB now fitted to my meteor 350. PT4 still on stock mapping. Head dished out. Have performance cam , high flow air filter and straight through pipe. As Sam says, cold idle fine with stock map, occasionally stalls when dropping down into 1st and lot of pop on over run. Only done a short ride but noted quicker pick up, easier on steep hills and more satisfying thump from the engine. Will try the newer map this weekend and try to get another run in, snow permitting. Once I have a few hundred miles done I will put bike on dyno and report back
With the PT4...did you fit the 2 modulators?
modulators? you mean the 2 black lumps which's function I never clearly understood? yes, my mechanic managed to squeeze them in somehow.
what do they do anyway?
I have fitted them also. I can only guess that they refine the input signal to a 0 or 1 for the ECU to read...can't find anything definitive online
send me a picture and I ask RD support
Reply from RD:
Meteor 350 (410, 500) manual
Meteor 350 (410, 500) manual
