Next level development

barima

Moderator
Staff member
Developer
Apparently we are not the only ones tinkering with the Himalayan.
It's on the verge of butchering the bike but lets see how these bikes turnout when they are ready.
 
the first one kinda makes sense if you are into MX, but for no. 2 I cant come up with a scenario where putting an engine into a frame that is known to buckle under much less load is useful. Its like putting a Ferrari engine into a VW beetle.
 
What is wrong with Ferrari engines :):unsure:
 
The first Video now has a sequel, Tec and Hitchcock's both send them a box of free stuff, guess we pay a bit more next time we purchase items from them.
Unless they gave it out of the goodness of their Hearts, which doesn't seem likely :unsure:
They should have asked me if they want real power😁
 
So a Trequal has emerged, they say at around 24mins they set the Cam timing, this and the clutch removal was telling for me.
But so far I have learnt that the bike still starts without the instrument cluster so it hasn't been a total waste of time;)
 
So a Trequal has emerged, they say at around 24mins they set the Cam timing, this and the clutch removal was telling for me.
But so far I have learnt that the bike still starts without the instrument cluster so it hasn't been a total waste of time;)
Yeah, nothing new except for the tank/fuel pump setup. I recognized the tank immediately, its a cheap 80Euro china piece which i am also using for a non RE cafe racer project. I am curious to see which parts break first when they start punishing the bike. Maybe none...
 

Last test ride session before they race the bike. With a 500cc kit he might have beaten the 125...
 
Not a channel I would subscribe to.
Fuel pump with no regulator and return line! :ROFLMAO:
 
Is that a fuelx pro switch?
 

Attachments

  • Clipboard011.jpg
    Clipboard011.jpg
    281.3 KB · Views: 4
Looks like it, not much else is as ugly as a fx pro switch 😁
 
It seems RE got a grip on the frame break issue after all :cool: ! I would have used a BS4 and converted it to carby with a 500cc BB kit. another 10 seconds off a lap.
 
This Guy is worth subscribing to IMO.
30HP from a 50cc 2 stroke and he is full of facts.

 
I dont agree, the information is important and if you learn anything useful from this crew it would be surprising as their approach is very unprofessional, they are living by getting clicks.
 
Not a channel I would subscribe to.
Fuel pump with no regulator and return line! :ROFLMAO:
To me the Brits always have the habit of creating something cool and then "forget" to finish the last bits. We will save that for later mentality :rolleyes:
But it drives doesn't it...
 
Seems we will find out shortly if it was all worth it.
 
I dont agree, the information is important and if you learn anything useful from this crew it would be surprising as their approach is very unprofessional, they are living by getting clicks.
I find 2strokestuffing terribly slow to watch but he takes you on his journey of struggles which is cool. He dares projects i even wouldn't do. Seen the DIY casting of his alloy cilinder... Crazy

Steve Morris Engines is also one to look for. He even has the slogan " Be careful you might learn something" in his intro's
 
:ROFLMAO:It seems RE got a grip on the frame break issue after all :cool: ! I would have used a BS4 and converted it to carby with a 500cc BB kit. another 10 seconds off a lap.

That would have simplified the Fuel tank issue by fitting a Carby, but the power issue would be best sorted with a reprogrammable ECU IMO.
And a kick start so a real small light lithium battery could be fitted
They didn't consult the right people and they will not win the race😁
They will get lots of clicks which will probably give them the momentum to keep doing Videos.
 
Back
Top