New 500 coming up ...
- Thread starter sam2019
- Start date
Got the wheels put on but since the ECU is not happy
low system voltage is normal, the starter motor hicks up every time now so I need 2-3 attempts to get rolling, the unsuccessful attemps tend to lower the voltage below 10 volts for a short time which creates that message. why the engine oil temp is high I do not understand, I have an external oil temp and it shows below 70C. That is a bit delayed but still over time it should show a higher temp if there was one.
I will install a new O2 sensor as soon as I get it - probably together with the new cat-less pipe. in the meantime the engine is running albeit not with perceivable power gain and certainly nothing like the carby 500
low system voltage is normal, the starter motor hicks up every time now so I need 2-3 attempts to get rolling, the unsuccessful attemps tend to lower the voltage below 10 volts for a short time which creates that message. why the engine oil temp is high I do not understand, I have an external oil temp and it shows below 70C. That is a bit delayed but still over time it should show a higher temp if there was one.
I will install a new O2 sensor as soon as I get it - probably together with the new cat-less pipe. in the meantime the engine is running albeit not with perceivable power gain and certainly nothing like the carby 500
Attachments
Torque
