Torque values for the Meteor

[sam2019]

Friends from the unofficial Enfield forum took the time to consolidate a list of the torque values - its available on the web here:

https://docs.google.com/spreadsheets/d/1pWGBuKAdP7UsRVF1zMgc1d05boKrTIfSSJdB5bO_Fto/edit?pli=1#gid=0

in case it ever disappears and because it seems complete I have made it into a pdf here:

 

[Dool]

Pity with the discrepancies, that chart is either useless or I have severe dyslexia.
Cylinder head bolts 12 to 18 nm!
Look at how many 6mm bolts it lists.

 

[sam2019]

should I remove the post?

 

[Dool]

No, I could be Dyslexic
I'm guessing the Torque setting.

 

[Dool]

Head bolts are not to be reused I read so I set them at 30Nm, the 4 over the cam I took to 11Nm the 2 down the cam tunnel with 8mm heads I did tight as